Architect in SE6 | Loft Conversions, Extensions & Planning
RIBA-aligned architectural design, planning applications and structural engineering in Se6 and across London.
Get Your Free Quote
Tell us about your project — we respond within 24 hours
Architect in SE6 Catford | Crown Architecture
Trust Bar
Crown Architecture — RIBA Chartered Architects | 15+ Years Serving London | 500+ Projects Completed | 5-Star Rated | Lewisham Planning Specialists
Introduction
SE6 Catford and Bellingham is a sought-after area for residential architectural work, sitting within the jurisdiction of the London Borough of Lewisham. The housing stock is characterised by Victorian and Edwardian terraced housing, some interwar semis, presenting strong opportunities for house extensions, loft conversions, and full property reconfigurations.
Crown Architecture brings deep local planning knowledge and established relationships with the London Borough of Lewisham to every project in SE6. We work across Catford, Bellingham, Lower Sydenham, and our familiarity with local planning policy means we advise accurately on what is achievable — and how to achieve it — before you commit to a design direction.
Transport connections across SE6 are excellent — Catford (National Rail), Catford Bridge (National Rail), Lower Sydenham (National Rail) — making this area one where homeowners consistently choose to invest and improve rather than move. The typical projects we handle in SE6 range from modest kitchen extensions and loft conversions to complex double-storey additions, basement conversions, and full property reconfigurations.
Our approach in every project is to design architecture that enhances the existing character of the area, satisfies the planning authority’s requirements, and delivers genuine quality of life improvements for the occupants. The conservation areas and design guidance in SE6 require thoughtful, well-evidenced applications — and that is exactly what Crown Architecture provides.
Our Architectural Services in SE6 Catford and Bellingham
- House Extensions — rear, side-return, wrap-around and double-storey additions designed to London Borough of Lewisham standards
- Loft Conversions — dormer, mansard, and hip-to-gable conversions for local property types
- Planning Applications — full planning permission and permitted development applications to the London Borough of Lewisham
- Building Regulations — structural and building control drawings for all residential project types
- Architectural Drawings — measured surveys, feasibility studies, concept design, and technical packages
- Interior Reconfiguration — open-plan layouts, partition removal, internal stair redesigns
- Structural Engineering — integrated service for extensions, conversions, and structural alterations
Planning in SE6 Catford and Bellingham: London Borough of Lewisham
All planning applications for SE6 properties are processed by the London Borough of Lewisham.
Conservation Areas in SE6: Catford Conservation Area, Perry Hill Conservation Area.
Properties within conservation areas require planning permission for most external alterations and must demonstrate design sensitivity. We prepare full design and access statements when required, addressing council-specific design guidance and the particular character of the conservation area.
Permitted Development: Most houses in SE6 retain permitted development rights unless within a conservation area or subject to an Article 4 Direction. Under Class A, single-storey rear extensions of up to 3m (attached) or 4m (detached) typically do not require planning permission. We check your specific address before advising.
Planning Portal: www.lewisham.gov.uk/planning
Timelines: Minor residential applications: 8-week statutory target; expect 9-12 weeks in practice.
Why Choose Crown Architecture for SE6 Catford and Bellingham
- Local knowledge — approved projects across SE6 and neighbouring areas
- Fixed-fee design packages — full scope from surveys through to planning submission
- Established track record with London Borough of Lewisham — we know what their planners and conservation officers require
- RIBA Chartered — all projects led by fully qualified chartered architects
- Fast turnaround — feasibility within 7 days; planning-ready drawings within 4–6 weeks
- Integrated structural engineering — no separate structural engineer appointment needed for most projects
Frequently Asked Questions — Architects in SE6 Catford and Bellingham
Q1: Do I need planning permission for a rear extension in SE6?
A: If your property is not in a conservation area and retains permitted development rights, a single-storey rear extension up to 3m deep (attached) or 4m deep (detached) typically does not require planning permission. Extensions beyond these depths, double-storey additions, or works in conservation areas require a planning application to the London Borough of Lewisham. We advise on your specific address.
Q2: How much does an architect cost for a house extension in SE6?
A: Our fees for a standard rear extension (surveys, planning drawings, building regulations) start from £3,500 + VAT. Conservation area applications, listed building consent, and complex double-storey projects are quoted individually. We offer a free initial consultation.
Q3: How long does a planning application take with London Borough of Lewisham?
A: The statutory target for minor residential applications is 8 weeks from valid submission. In practice, expect 9-12 weeks. Pre-application advice can reduce the risk of refusal for complex or conservation area proposals.
Q4: Can I convert my loft in SE6?
A: Yes — most properties in SE6 are suitable for loft conversions. A rear dormer typically does not require planning permission (Class B PD) unless in a conservation area. Hip-to-gable conversions require planning permission as they alter the visible roofline. We carry out a free feasibility check.
Q5: What are the conservation areas in SE6?
A: The main conservation areas affecting residential properties in SE6 include Catford Conservation Area, Perry Hill Conservation Area. Properties within or adjacent to these areas require more detailed planning submissions.
Q6: Do I need building regulations as well as planning permission?
A: Yes — these are separate approvals. Planning permission covers the appearance and principle; building regulations cover structural safety, fire escape, insulation, and energy efficiency. We prepare and submit both.
Q7: Can I do a side-return extension on my Victorian terrace in SE6?
A: Most Victorian terraces in SE6 have side-return opportunities. A single-storey side-return typically qualifies as permitted development unless in a conservation area. It typically adds 8-15m² to the ground floor and transforms the kitchen layout.
Q8: What is the Party Wall Act and do I need to comply?
A: If your extension or loft conversion involves work to a shared boundary wall or within 3m of a neighbour’s foundation, the Party Wall etc. Act 1996 applies. We advise on Party Wall notices; a separate Party Wall surveyor is appointed if the neighbour disputes the works.
What Our SE6 Catford and Bellingham Clients Say
> “Crown Architecture designed our rear extension in Catford and got Lewisham Council approval efficiently. The extension has completely transformed our family home.” — Andre & Christine O., Perry Vale, SE6
> “We wanted a double-storey extension on our SE6 terraced house. Crown Architecture managed the full planning process and the approval came through in 10 weeks.” — Stephen K., Catford Road, SE6
> “Our loft conversion in Bellingham was handled with professionalism and care. Crown Architecture produced detailed drawings and building regulations were approved smoothly.” — Pauline A., Bellingham Road, SE6
Nearby Areas We Also Serve
SE4 Brockley, SE23 Forest Hill, SE13 Lewisham, Lewisham Borough
JSON-LD Schema
Meta Title: Architect in SE6 Catford | Extensions & Loft Conversions | Crown Architecture
Meta Description: RIBA Chartered Architects serving SE6 Catford and Bellingham. Expert house extensions, loft conversions, and planning applications. Free consultation — call today.